目前，可以使用气液增压泵的地方越来越多。由于环境原因，对气液增压泵的需求也不同。当然，如果你想更好地使用它，你需要对设备有更多的了解。让我们简要地看一下。
At present, there are more and more places where gas-liquid booster pumps can be used. Due to environmental reasons, the demand for gas-liquid booster pump is also different. Of course, if you want to use it better, you need to know more about the device. Let's take a brief look.
由于气液增压泵的优势，设备发展快，可以适应各种场景的需求。它像增压器一样工作，向大直径气动活塞施加低的压力，当这种压力作用于小面积活塞时，就会产生高压。借助5/2气控换向阀，增压泵可连续运行。
Due to the advantages of gas-liquid booster pump, the equipment develops very fast and can meet the needs of various scenarioses. It works like a supercharger and applies very low pressure to the large-diameter pneumatic piston. When this pressure acts on the small-area piston, it will produce high pressure. With the help of 5 / 2 pneumatic directional valve, the booster pump can operate continuously.
由单向阀控制的高压柱塞不断排出液体，增压泵的出口压力与空气驱动压力有关。当驱动部分和输出液体部分之间的压力达到平衡时，增压泵停止运行，不再消耗空气。当输出压力下降或气驱压力升高时，增压泵将自动启动运行，直再次达到压力平衡。
The high-pressure plunger controlled by the check valve continuously discharges liquid, and the outlet pressure of the booster pump is related to the air driving pressure. When the pressure between the driving part and the output liquid part reaches balance, the booster pump stops running and no longer consumes air. When the output pressure drops or the gas drive pressure rises, the booster pump will start automatically until the pressure balance is reached again.
气液增压泵可以长时间保持电压，不消耗额外的能量，从而节省能源。无油温升，适合夏季及炎热通风处使用。气液增压泵无需电源，适用于无电源的场合。它体积小，配置灵活。可自带油箱或安装在机床上，充分利用床身空间，节省生产面积。
The gas-liquid booster pump can maintain the voltage for a long time without consuming additional energy, so as to save energy. No oil temperature rise, suitable for summer and hot ventilation. The gas-liquid booster pump does not need power supply and is suitable for occasions without power supply. It has small volume and flexible configuration. It can be equipped with oil tank or installed on the machine tool to make full use of the bed space and save the production area.
气液增压泵低压启动，摩擦损失小；无需电源，不发热，不消耗能源，可长期保压；操作简单可靠，减少维修备件和工作量。
The gas-liquid booster pump starts at low pressure and the friction loss is small; No power supply, no heating, no energy consumption, long-term pressure maintenance; The operation is simple and reliable, reducing maintenance spare parts and workload.
另外，
气液增压泵要注意隐患。测试制动系统和喷油器很重要。因为有很多非法公司在生产这种气液增压泵时会产生各种火花，所以不允许有火花。一旦产生火花，肯定会让我们在使用的过程中更加危险。
In addition, pay attention to potential safety hazards of gas-liquid booster pump. It is important to test the brake system and the fuel injectors. Because many illegal companies will produce all kinds of sparks when producing this kind of gas-liquid booster pump, sparks are not allowed. Once sparks are generated, it will certainly make us more dangerous in the process of use.
无论是使用气液增压泵还是其他设备，是重中之重，因此操作人员必须遵守相应的规则，提前预防出现问题。更多的问题了解您可以来我们网站
www.feileisi.com看看。
Whether using gas-liquid booster pump or other equipment, safety is the top priority. Therefore, operators must abide by corresponding rules and prevent problems in advance. For more information, you can visit our website at www.feileisi.com See. Com.
